Patrick Goebel
56686b53d2
Fixed #elif statement for ARDUINO_ENC_COUNTER
2015-12-07 07:01:11 -08:00
Patrick Goebel
5a4affcfba
Moved MAX_PWM into diff_controller.h
2015-12-07 06:52:56 -08:00
Patrick Goebel
eacd926753
Rearranged some lines for readability
2015-12-07 06:51:56 -08:00
Patrick Goebel
5f0125da8b
Fixed some indentation
2015-12-07 06:44:50 -08:00
Patrick Goebel
ca9dc66cd3
Changed #if defined to #ifdef in motor_driver.ino
2015-12-06 21:42:07 -08:00
Patrick Goebel
1a560fa508
Replaced #if defined with #ifdef statements in encoder_driver.ino
2015-12-06 21:36:15 -08:00
Patrick Goebel
b7f922f7e7
Fixed ifdef typo in encoder_driver.ino
2015-11-22 17:06:20 -08:00
theroboticsheep
e9810841b4
added support for rotating servos at different speeds
2015-04-18 18:29:53 -07:00
theroboticsheep
eda206f68c
changed default sweep delay to zero so that servos will behave normally unless delay is increased
2015-04-17 15:06:24 -07:00
theroboticsheep
ddecaa0b2c
added speed controlled servo sweep
2015-04-17 14:52:46 -07:00
Patrick Goebel
415dde63ee
Changed readEncoder() arguments from 0, 1 to LEFT, RIGHT in diff_controller.h
2015-01-30 06:17:47 -08:00
Kristof Robot
4d399627e6
Added direct support for wheel encoders (Arduino Uno)
...
Added support for wheel encoder counting directly on the main Arduino board.
This allows connecting wheel encoders directly to the Arduino board,
without the need for any additional wheel encoder counter equipment.
For speed, the code is directly addressing the specific Atmega328p ports and interrupts, making this implementation Atmega328p (Arduino Uno) dependent.
It should be easy to adapt for other boards/AVR chips though.
2014-12-29 20:13:22 +01:00
Kristof Robot
7887d639f3
Bugfix - removed reset wind-up fix
...
Removed the reset windup prevention code, as the old code already
took care of that by only incrementing Ierror when output was not being clamped.
2013-08-16 16:16:48 +02:00
Kristof Robot
2c9881552b
Bugfix: added resetPID() call in RESET_ENCODERS statement,
...
to ensure that PID gets reset when encoders get reset.
2013-08-16 15:04:33 +02:00
Kristof
dad031ee2c
Enhanced PID algorithm
...
Enhanced PID algorithm based on the series of blog posts at http://brettbeauregard.com/blog/2011/04/improving-the-beginners-pid-introduction/
Specifically:
1. Avoid derivative kickback - http://brettbeauregard.com/blog/2011/04/improving-the-beginner%E2%80%99s-pid-derivative-kick/
2. Allow smooth on-the-fly tuning changes - http://brettbeauregard.com/blog/2011/04/improving-the-beginner%E2%80%99s-pid-tuning-changes/
3. Reset windup mitigation - http://brettbeauregard.com/blog/2011/04/improving-the-beginner%E2%80%99s-pid-reset-windup/
4. Bumpless initialization - http://brettbeauregard.com/blog/2011/04/improving-the-beginner%E2%80%99s-pid-initialization/
2013-08-16 10:52:57 +02:00
Patrick Goebel
849cb2ec83
Incorporated changes from James Nugen into ROSArduinoBridge library
2012-12-27 16:48:12 -08:00
Patrick Goebel
3d028f3bec
Added ROSArduinoBridge sketch which breaks out the motor controller and encoder functions
2012-12-26 09:42:33 -08:00
