port: /dev/ttyUSB0
baud: 57600
timeout: 0.1

rate: 50
sensorstate_rate: 10

use_base_controller: False
base_controller_rate: 10

# === Robot drivetrain parameters
#wheel_diameter: 0.146
#wheel_track: 0.2969
#encoder_resolution: 8384 # from Pololu for 131:1 motors
#gear_reduction: 1.0
#motors_reversed: True

# === PID parameters
#Kp: 10
#Kd: 12
#Ki: 0
#Ko: 50
#accel_limit: 1.0

# === Sensor definitions.  Examples only - edit for your robot.
#     Sensor type can be one of the follow (case sensitive!):
#	  * Ping
#	  * GP2D12
#	  * Analog
#	  * Digital
#	  * PololuMotorCurrent
#	  * PhidgetsVoltage
#	  * PhidgetsCurrent (20 Amp, DC)



sensors: {
  #motor_current_left:   {pin: 0, type: PololuMotorCurrent, rate: 5},
  #motor_current_right:  {pin: 1, type: PololuMotorCurrent, rate: 5},
  #ir_front_center:      {pin: 2, type: GP2D12, rate: 10},
  #sonar_front_center:   {pin: 5, type: Ping, rate: 10},
  arduino_led:          {pin: 13, type: Digital, rate: 5, direction: output}
}