diff --git a/src/sequence_linux_kernel.rs b/src/sequence_linux_kernel.rs
new file mode 100644
index 0000000..c58277f
--- /dev/null
+++ b/src/sequence_linux_kernel.rs
@@ -0,0 +1,169 @@
+use std::{thread, time};
+
+use crate::instructions::{
+    BK0Command2, BK1Command2, BitsPerPixel, ColorOrder, Command, Command2Selection,
+    CommandsGeneral, DataEnable, DataPolarity, EnablePolarity, GammaOPBias, HsyncActive, Inversion,
+    ScanDirection, SourceOPInput, SourceOPOutput, TearingEffect, VoltageAVCL, VoltageAVDD,
+    VsyncActive,
+};
+use crate::panel::Mode;
+use crate::spi::ST7701S;
+
+pub fn init(display: &mut ST7701S, mode: Mode) {
+    let mut CMD2: Command2Selection = Command2Selection::Disabled;
+
+    // SOFTWARE RESET
+    // 5ms delay
+    display.write_command(CommandsGeneral::software_reset());
+    thread::sleep(time::Duration::from_millis(10));
+
+    // EXIT SLEEP MODE
+    // Variable delay (200ms is "safe")
+    display.write_command(CommandsGeneral::sleep_mode_off());
+    thread::sleep(time::Duration::from_millis(300));
+
+    // ENTER BK0 COMMAND2 MODE
+    display.write_command(CommandsGeneral::set_command_2(Command2Selection::BK0));
+    CMD2 = Command2Selection::BK0;
+
+    display.write_command(BK0Command2::positive_gamma_control(
+        &CMD2,
+        &[
+            0x00, 0x0E, 0x15, 0x0F, 0x11, 0x08, 0x08, 0x08, 0x08, 0x23, 0x04, 0x13, 0x12, 0x2B,
+            0x34, 0x1F,
+        ],
+    ));
+    display.write_command(BK0Command2::negative_gamma_control(
+        &CMD2,
+        &[
+            0x00, 0x0E, 0x95, 0x0F, 0x13, 0x07, 0x09, 0x08, 0x08, 0x22, 0x04, 0x10, 0x0E, 0x2C,
+            0x34, 0x1F,
+        ],
+    ));
+    display.write_command(BK0Command2::display_line_setting(&CMD2, 0x80, 0x69, 0x02));
+    display.write_command(BK0Command2::porch_control(&CMD2, &mode));
+    display.write_command(BK0Command2::inversion_select(
+        &CMD2,
+        Inversion::Column,
+        0xFF,
+    ));
+    display.write_command(BK0Command2::rgb_control(
+        &CMD2,
+        DataEnable::DE,
+        VsyncActive::Low,
+        HsyncActive::Low,
+        DataPolarity::Rising,
+        EnablePolarity::Low,
+        &mode,
+    ));
+
+    // ENTER BK1 COMMAND2 MODE
+    display.write_command(CommandsGeneral::set_command_2(Command2Selection::BK1));
+    CMD2 = Command2Selection::BK1;
+
+    display.write_command(BK1Command2::set_vop_amplitude(&CMD2, 0x45));
+    display.write_command(BK1Command2::set_vcom_amplitude(&CMD2, 0x13));
+    display.write_command(BK1Command2::set_vgh_voltage(&CMD2, 0x07));
+    display.write_command(BK1Command2::test_command_setting(&CMD2));
+    display.write_command(BK1Command2::set_vgl_voltage(&CMD2, 0x07));
+    display.write_command(BK1Command2::power_control_one(
+        &CMD2,
+        GammaOPBias::Middle,
+        SourceOPInput::Min,
+        SourceOPOutput::Off,
+    ));
+
+    display.write_command(BK1Command2::power_control_two(
+        &CMD2,
+        VoltageAVDD::Pos6_6,
+        VoltageAVCL::Neg4_4,
+    ));
+    display.write_command(BK1Command2::set_pre_drive_timing_one(&CMD2, 0x03));
+    display.write_command(BK1Command2::set_pre_drive_timing_two(&CMD2, 0x03));
+
+    // UNKNOWABLE CARGO-CULTED MYSTERY MEAT
+    //
+    // I copied this command sequence from the Linux MIPI driver for the ST7701,
+    // written in C. The author of that driver _also_ had no idea what this
+    // command sequence does or means, and claims to have himself copied it from
+    // a sample provided by a Sitronix engineer. Since this is a Linux SPI
+    // driver for the ST7701S written in Rust, there's ample opportunity for
+    // something to not line up.
+    //
+    // May whatever gods you pray to have mercy on our souls.
+    display.write_command(Ok(Command {
+        address: 0xE0,
+        parameters: vec![0x00, 0x00, 0x02],
+    }));
+    display.write_command(Ok(Command {
+        address: 0xE1,
+        parameters: vec![
+            0x0B, 0x00, 0x0D, 0x00, 0x0C, 0x00, 0x0E, 0x00, 0x00, 0x44, 0x44,
+        ],
+    }));
+    display.write_command(Ok(Command {
+        address: 0xE2,
+        parameters: vec![
+            0x33, 0x33, 0x44, 0x44, 0x64, 0x00, 0x66, 0x00, 0x65, 0x00, 0x67, 0x00, 0x00,
+        ],
+    }));
+    display.write_command(Ok(Command {
+        address: 0xE3,
+        parameters: vec![0x00, 0x00, 0x33, 0x33],
+    }));
+    display.write_command(Ok(Command {
+        address: 0xE4,
+        parameters: vec![0x44, 0x44],
+    }));
+    display.write_command(Ok(Command {
+        address: 0xE5,
+        parameters: vec![
+            0x0C, 0x78, 0x3C, 0xA0, 0x0E, 0x78, 0x3C, 0xA0, 0x10, 0x78, 0x3C, 0xA0, 0x12, 0x78,
+            0x3C, 0xA0,
+        ],
+    }));
+    display.write_command(Ok(Command {
+        address: 0xE6,
+        parameters: vec![0x00, 0x00, 0x33, 0x33],
+    }));
+    display.write_command(Ok(Command {
+        address: 0xE7,
+        parameters: vec![0x44, 0x44],
+    }));
+    display.write_command(Ok(Command {
+        address: 0xE8,
+        parameters: vec![
+            0x0D, 0x78, 0x3C, 0xA0, 0x0F, 0x78, 0x3C, 0xA0, 0x11, 0x78, 0x3C, 0xA0, 0x13, 0x78,
+            0x3C, 0xA0,
+        ],
+    }));
+    display.write_command(Ok(Command {
+        address: 0xEB,
+        parameters: vec![0x02, 0x02, 0x39, 0x39, 0xEE, 0x44, 0x00],
+    }));
+    display.write_command(Ok(Command {
+        address: 0xEC,
+        parameters: vec![0x00, 0x00],
+    }));
+    display.write_command(Ok(Command {
+        address: 0xED,
+        parameters: vec![
+            0xFF, 0xF1, 0x04, 0x56, 0x72, 0x3F, 0xFF, 0xFF, 0xFF, 0xFF, 0xF3, 0x27, 0x65, 0x40,
+            0x1F, 0xFF,
+        ],
+    }));
+
+    // BK1 COMMAND2 DISABLE
+    display.write_command(CommandsGeneral::set_command_2(Command2Selection::Disabled));
+    CMD2 = Command2Selection::Disabled;
+
+    display.write_command(CommandsGeneral::set_color_mode(BitsPerPixel::Rgb666));
+    display.write_command(CommandsGeneral::display_data_control(
+        ScanDirection::Normal,
+        ColorOrder::Rgb,
+    ));
+    display.write_command(CommandsGeneral::tearing_effect_on(TearingEffect::VHBlank));
+
+    display.write_command(CommandsGeneral::display_on());
+    thread::sleep(time::Duration::from_millis(200));
+}