yikestone/MT7601u
1
0
Fork 0
mirror of https://github.com/YikeStone/MT7601u.git synced 2025-08-02 19:04:09 +05:30
Code Issues Projects Releases Wiki Activity
MT7601u/src/include/dot11ac_vht.h
Murat Demirtas 612db32659 FIXED
2016-10-30 14:40:00 +00:00

480 lines
14 KiB
C
Raw Blame History

/****************************************************************************
* Ralink Tech Inc.
* 4F, No. 2 Technology 5th Rd.
* Science-based Industrial Park
* Hsin-chu, Taiwan, R.O.C.
* (c) Copyright 2002, Ralink Technology, Inc.
*
* All rights reserved. Ralink's source code is an unpublished work and the
* use of a copyright notice does not imply otherwise. This source code
* contains confidential trade secret material of Ralink Tech. Any attemp
* or participation in deciphering, decoding, reverse engineering or in any
* way altering the source code is stricitly prohibited, unless the prior
* written consent of Ralink Technology, Inc. is obtained.
****************************************************************************
Module Name:
dot11ac_vht.h
Abstract:
Defined IE/frame structures of 802.11ac (D1.2).
Revision History:
Who When What
--------- ---------- ----------------------------------------------
Shiang Tu 01-11-2012 created for 11ac
*/
#ifdef DOT11_VHT_AC
#ifndef __DOT11AC_VHT_H
#define __DOT11AC_VHT_H
#include "rtmp_type.h"
#define IE_VHT_CAP 191
#define IE_VHT_OP 192
/*
IEEE 802.11AC D2.0, sec 8.4.2.160.2
VHT Capabilities Info field
max_mpdu_len: MAximun MPDU Length
->Indicate the max MPDU length.
0: 3895 octets(Max A-MSDU length in HT Cap set to 3839)
1: 7991 octets(Max A-MSDU length in HT Cap set to 7935)
2: 11454 octets(Max A-MSDU length in HT Cap set to 7935)
3: reserved
ch_width: Supported Channel Width Set
->Indicates the channel widths supported by the STA.
0: the STA does not support either 160 or 80+80 MHz
1: the STA support 160 MHz
2: the STA support 160 MHz and 80 + 80 MHz
3: reserved
rx_ldpc: Rx LDPC
-> Indicates support of receiving LDPC coded packets
0: not support
1: support
sgi_80M: Short GI for 80 MHz
-> Indicates short GI support for the reception of VHT+CBW80 packet
0: not support
1: support
sgi_160M: Short GI for 160 and 80 + 80 MHz
->Indicates rx short GI for VHT+(CBW160 and CBW80+80) packet
0: not support
1: support
tx_stbc: Tx STBC
-> Indicates support for tx of at least 2x1 STBC
0: not support
1: support
rx_stbc: Rx STBC
-> Indicates support for rx of PPDUs using STBC
0: not support
1: support 1SS
2: support 1SS and 2SS
3: support 1SS, 2SS and 3SS
4: support 1SS, 2SS, 3SS and 4SS
5,6,7: reserved
bfer_cap_su: SU Beamformer Capable
->Indicates support for operation as a single user beamformer
0: not support
1: support
bfee_cap_su: SU Beamformee Capable
-> Indicates support for operation as a single user beamformee
0: not support
1: support
cmp_st_num_bfer: Compressed Steering Number of Beamformer Antenna Supported
-> Beamformee's capability indicateing the max number of beamformer
antennas the beamformee can support when sending compressed
beamforming feedback
If SU beamformee capable, set to the max value minus 1.
otehrwise, reserved.
num_snd_dimension: Number of Sounding Dimensions
-> Beamformer's capability indicating the number of antennas used for
beamformed transmissions.
If SU beamformer capable, set to value minus 1.
otehrwise, reserved.
bfer_cap_mu: MU Beamformer Capable
-> Indicates support for operation as an MU beamformer
0: if not supported or if sent by a non-AP STA
1: supported
bfee_cap_mu: MU Beamformee Capable
-> Indicates support for operation as an MU beamformer
0: if not supported or if snet by an AP
1: supported
vht_txop_ps: VHT TXOP PS
-> Indicates whether or not the AP supports VHT TXOP Power Save Mode or
whether or not the STA is in VHT TXOP Power Save Mode
->When tx by a VHT AP in the VHT Capabilities element included in Beacon,
ProbeResp, AssocResp, and ReassocResp, frames:
0: if the VHT AP does not support VHT TXOP PS in the BSS.
1: if the VHT AP support TXOP PS in the BSS.
->When tx by a VHT non-AP STA in the VHT Capabilities element included
in AssocReq, ReassocReq and ProbReq frames:
0: if the VHT STA is not in TXOP Power Save Mode.
1: if the VHT STA is in TXOP Power Save Mode.
htc_vht_cap: +HTC-VHT Capable
-> Indicates whether or not the STA supports receiving an HT Control
field in the VHT format
0: if not support
1: if support
max_ampdu_exp: Maximum A-MPDU Length Exponent
-> Indicates the maximum length of A-MPDU pre-EOF padding that the STA
can receive.
->The length defined by this field is equal to 2^(13 + max_ampdu_exp) -1
0~7 : integer in the range of 0 to 7.
vht_link_adapt: VHT Link Adaptation Capable
-> Indicates whether or not the STA support link adaptation using VHT
variant HT Control field.
-> This field is ignored if the _HTC-VHT Capble field is set to 0.
0: (No Feedback), if the STA does not provide VHT MFB
2: (Unsolicited), if the STA provides only unsolicited VHT MFB
3: (Both), if the STA can provide VHT MFB in response to VHT MRQ
and if the STA provides unsolicited VHT MFB.
1: reserved
rx_ant_consistency: Rx Antenna Pattern Consistency
->Indicates the possibility of Rx antenna pattern change
0: if Rx antenna pattern might change during association
1: if Rx antenna pattern does not change during association
tx_ant_consistency: Tx Antenna Pattern Consistency
->Indicates the possibility of Tx antenna pattern change
0: if Tx antenna pattern might change during association
1: if Tx antenna pattern does not change during association
*/
typedef struct GNU_PACKED _VHT_CAP_INFO{
#ifdef RT_BIG_ENDIAN
UINT32 rsv:2;
UINT32 tx_ant_consistency:1;
UINT32 rx_ant_consistency:1;
UINT32 vht_link_adapt:2;
UINT32 max_ampdu_exp:3;
UINT32 htc_vht_cap:1;
UINT32 vht_txop_ps:1;
UINT32 bfee_cap_mu:1;
UINT32 bfer_cap_mu:1;
UINT32 num_snd_dimension:3;
UINT32 cmp_st_num_bfer:3;
UINT32 bfee_cap_su:1;
UINT32 bfer_cap_su:1;
UINT32 rx_stbc:3;
UINT32 tx_stbc:1;
UINT32 sgi_160M:1;
UINT32 sgi_80M:1;
UINT32 rx_ldpc:1;
UINT32 ch_width:2;
UINT32 max_mpdu_len:2;
#else
UINT32 max_mpdu_len:2; /* 0: 3895, 1: 7991, 2: 11454, 3: rsv */
UINT32 ch_width:2; /* */
UINT32 rx_ldpc:1;
UINT32 sgi_80M:1;
UINT32 sgi_160M:1;
UINT32 tx_stbc:1;
UINT32 rx_stbc:3;
UINT32 bfer_cap_su:1;
UINT32 bfee_cap_su:1;
UINT32 cmp_st_num_bfer:3;
UINT32 num_snd_dimension:3;
UINT32 bfer_cap_mu:1;
UINT32 bfee_cap_mu:1;
UINT32 vht_txop_ps:1;
UINT32 htc_vht_cap:1;
UINT32 max_ampdu_exp:3;
UINT32 vht_link_adapt:2;
UINT32 rx_ant_consistency:1;
UINT32 tx_ant_consistency:1;
UINT32 rsv:2;
#endif /* RT_BIG_ENDIAN */
}VHT_CAP_INFO;
/*
IEEE 802.11AC D2.0, sec 8.4.2.160.3
Rx MCS Map and Tx MCS map, figure 8-401bt
mcs_ss1: Max MCS for 1SS
mcs_ss2: Max MCS for 2SS
mcs_ss3: Max MCS for 3SS
mcs_ss4: Max MCS for 4SS
mcs_ss5: Max MCS for 5SS
mcs_ss6: Max MCS for 6SS
mcs_ss7: Max MCS for 7SS
mcs_ss8: Max MCS for 8SS
The 2-bit MAx MCS for n SS field for each number of spatial streams n = 1~8
is encoded as following:
0: indicates support for MCS 0~7
1: indicates support for MCS 0~8
2: indicates support for MCS 0~9
3: indicates that n spatial streams is not supported.
Note: some MCSs are not be valid for particular bandwidth and number of
spatial stream combinations.
*/
#define VHT_MCS_CAP_7 0
#define VHT_MCS_CAP_8 1
#define VHT_MCS_CAP_9 2
#define VHT_MCS_CAP_NA 3
typedef struct GNU_PACKED _VHT_MCS_MAP{
#ifdef RT_BIG_ENDIAN
UINT16 mcs_ss8:2;
UINT16 mcs_ss7:2;
UINT16 mcs_ss6:2;
UINT16 mcs_ss5:2;
UINT16 mcs_ss4:2;
UINT16 mcs_ss3:2;
UINT16 mcs_ss2:2;
UINT16 mcs_ss1:2;
#else
UINT16 mcs_ss1:2;
UINT16 mcs_ss2:2;
UINT16 mcs_ss3:2;
UINT16 mcs_ss4:2;
UINT16 mcs_ss5:2;
UINT16 mcs_ss6:2;
UINT16 mcs_ss7:2;
UINT16 mcs_ss8:2;
#endif /* RT_BIG_ENDIAN */
}VHT_MCS_MAP;
/*
IEEE 802.11AC D2.0, sec 8.4.2.160.3
VHT Supported MCS Set field, figure 8-401bs
rx_mcs_map: Rx MCS Map
-> Indicates the maximum MCS that can be received for each number of
spatial streams
See "VHT_MCS_MAP"
rx_high_rate: Rx Highest Supported Data Rate
-> Indicates the maximum data rate that the STA can receive
-> In unit of 1Mb/s where 1 represents 1Mb/s, and incrementing in steps
of 1 Mb/s.
-> If the maximum data rate expressed in Mb/s is not an integer, then
the value is rounded up to the next integer.
tx_mcs_map: Tx MCS Map
tx_high_rate: Tx Highest Supported Data Rate
-> Indicates the maximum data rate that the STA will transmit
-> In unit of 1Mb/s where 1 represents 1Mb/s, and incrementing in steps
of 1 Mb/s.
-> If the maximum data rate expressed in Mb/s is not an integer, then
the value is rounded up to the next integer.
*/
// TODO: shiang-6590, check the layout of this data structure!!!!
typedef struct GNU_PACKED _VHT_MCS_SET{
#ifdef RT_BIG_ENDIAN
UINT16 rsv2:3;
UINT16 tx_high_rate:13;
struct _VHT_MCS_MAP tx_mcs_map;
UINT16 rsv:3;
UINT16 rx_high_rate:13;
struct _VHT_MCS_MAP rx_mcs_map;
#else
struct _VHT_MCS_MAP rx_mcs_map;
UINT16 rx_high_rate:13;
UINT16 rsv:3;
struct _VHT_MCS_MAP tx_mcs_map;
UINT16 tx_high_rate:13;
UINT16 rsv2:3;
#endif /* RT_BIG_ENDIAN */
}VHT_MCS_SET;
/*
IEEE 802.11AC D2.0, sec 8.4.2.160.1
VHT Capabilities Element structure
eid: Element ID
191 (IE_VHT_CAP)
len: Length
12
vht_cap: VHT Capabilities Info
->contains a numner of fields that are used to advertise VHT capabilities
of a VHT STA
mcs_set: VHT supported MCS Set
->Used to convey the combinations of MCSs and spatial streams a STA
supports for both reception and transmission.
*/
typedef struct GNU_PACKED _VHT_CAP_IE{
VHT_CAP_INFO vht_cap;
VHT_MCS_SET mcs_set;
}VHT_CAP_IE;
/*
IEEE 802.11AC D2.0, sec 8.4.2.161
VHT Operation Information field, figure 8-401bv
The operation of VHT STAs in the BSS is controlled by the HT Operation
element and the VHT Operation element.
ch_width: Channel Width
-> This field, together with the HT Operation element STA Channel Width
field, defines the BSS operating channel width.
0: for 20MHz or 40MHz operating channel width
1: for 80MHz operating channel width
2: for 160MHz operating channel width
3: for 80+80MHz operating channel width
4~255: reserved
center_freq_1: Channel Center Frequency Segment 1
-> Defines the channel center frequency for an 80 and 160MHz VHT BSS
and the segment 1 channel center frequency for an 80+90MHz VHT BSS.
-> For 80MHZ or 160MHz operating channel width, indicates the channel
center frequency index for the 80MHz or 160MHz channel on which the
VHT BSS operates.
->For 80+80MHz operating channel width, indicates the channel center
frequency index for the 80MHz channel of frequency segment 1 on
which the VHT BSS operates.
->Set 0 for 20MHz or 40MHz operating channel width.
center_freq_2: Channel Center Frequency Segment 2
-> Defines the seg 2 channel center frequency for an 80+80MHz VHT BSS
->For a 80+80MHz operating channel width, indicates the channel center
frequency index of the 80MHz channel of frequency segment 2 on
which the VHT BSS operates. Reserved otherwise.
*/
typedef struct GNU_PACKED _VHT_OP_INFO{
UINT8 ch_width;
UINT8 center_freq_1;
UINT8 center_freq_2;
}VHT_OP_INFO;
/*
IEEE 802.11AC D2.0, sec 8.4.2.161
VHT Operation element, figure 8-401bu
The operation of VHT STAs in the BSS is controlled by the HT Operation
element and the VHT Operation element.
eid: Element ID
192 (IE_VHT_OP)
len: Length
5
vht_op_info: VHT Operation Information
basic_mcs_set: VHT Basic MCS Set
*/
typedef struct GNU_PACKED _VHT_OP_IE{
VHT_OP_INFO vht_op_info;
VHT_MCS_MAP basic_mcs_set;
}VHT_OP_IE;
/*
IEEE 802.11AC D2.0, sec 8.4.2.163
Wide Bandwidth Channel Switch element, figure 8-401bx
included in the Channel Switch Announcement frames.
new_ch_width: New STA Channel Width
center_freq_1: New Channel Center Frequency Segment 1
center_freq_2: New Channel Center Frequency Segment 2
The definition of upper subfields is the same as "VHT_OP_INFO"
*/
typedef struct GNU_PACKED _WIDE_BW_CH_SWITCH_IE{
UINT8 e_id;
UINT len;
UINT8 new_ch_width;
UINT8 center_freq_1;
UINT8 center_freq_2;
}WIDE_BW_CH_SWITCH_IE;
/*
IEEE 802.11AC D2.0, sec 8.4.2.164
VHT Transmit Power Envelope element
*/
typedef struct GNU_PACKED _CH_SEG_PAIR{
UINT8 ch_center_freq;
UINT8 seg_ch_width;
}CH_SEG_PAIR;
/*
IEEE 802.11AC D2.0, sec 8.4.2.164
VHT Transmit Power Envelope element
max_txpwr: Maximum Transmit Power
-> Define the maximum transmit power limit of the tx bandwidth defined
by the VHT Transmit Power Envelop element. The Maximum Transmit
Power field is a 8 bit 2's complement signed integer in the range of
-64 dBm to 63.5 dBm with a 0.5 dB step.
NOTE: The following two subfields may repeated as needed.
center_freq_1: Channel Center Frequency Segment
ch_seg_width: Segment Channel Width
*/
typedef struct GNU_PACKED _VHT_TXPWR_ENV_IE{
UINT8 e_id;
UINT8 len;
UINT8 max_txpwr;
CH_SEG_PAIR ch_seg_pair[0];
}VHT_TXPWR_ENV_IE;
typedef struct GNU_PACKED _VHT_CONTROL{
#ifdef RT_BIG_ENDIAN
UINT32 RDG:1;
UINT32 ACConstraint:1;
UINT32 unso_mfb:1;
UINT32 fb_tx_type:1;
UINT32 coding:1;
UINT32 gid_h:3;
UINT32 mfb_snr:6;
UINT32 mfb_bw:2;
UINT32 mfb_mcs:4;
UINT32 mfb_n_sts:3;
UINT32 mfsi_gidl:3;
UINT32 stbc_ind:1;
UINT32 comp_msi:2;
UINT32 mrq:1;
UINT32 rsv:1;
UINT32 vht:1;
#else
UINT32 vht:1;
UINT32 rsv:1;
UINT32 mrq:1;
UINT32 comp_msi:2;
UINT32 stbc_ind:1;
UINT32 mfsi_gidl:3;
UINT32 mfb_n_sts:3;
UINT32 mfb_mcs:4;
UINT32 mfb_bw:2;
UINT32 mfb_snr:6;
UINT32 gid_h:3;
UINT32 coding:1;
UINT32 fb_tx_type:1;
UINT32 unso_mfb:1;
UINT32 ACConstraint:1;
UINT32 RDG:1;
#endif
}VHT_CONTROL;
typedef struct GNU_PACKED _NDPA_PKT{
USHORT frm_ctrl;
USHORT duration;
UINT8 ra[MAC_ADDR_LEN];
UINT8 ta[MAC_ADDR_LEN];
UINT8 snd_seq;
}DNPA_PKT;
#endif /* __DOT11AC_VHT_H */
#endif /* DOT11_VHT_AC */
Reference in New Issue View Git Blame Copy Permalink