89 lines
3.1 KiB
C++
89 lines
3.1 KiB
C++
// I2C device class (I2Cdev) demonstration Arduino sketch for AK8975 class
|
|
// 10/7/2011 by Jeff Rowberg <jeff@rowberg.net>
|
|
// Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib
|
|
//
|
|
// Changelog:
|
|
// 2011-10-07 - initial release
|
|
|
|
/* ============================================
|
|
I2Cdev device library code is placed under the MIT license
|
|
Copyright (c) 2011 Jeff Rowberg
|
|
|
|
Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
of this software and associated documentation files (the "Software"), to deal
|
|
in the Software without restriction, including without limitation the rights
|
|
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
copies of the Software, and to permit persons to whom the Software is
|
|
furnished to do so, subject to the following conditions:
|
|
|
|
The above copyright notice and this permission notice shall be included in
|
|
all copies or substantial portions of the Software.
|
|
|
|
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
THE SOFTWARE.
|
|
===============================================
|
|
*/
|
|
|
|
// Arduino Wire library is required if I2Cdev I2CDEV_ARDUINO_WIRE implementation
|
|
// is used in I2Cdev.h
|
|
#include "Wire.h"
|
|
|
|
// I2Cdev and AK8975 must be installed as libraries, or else the .cpp/.h files
|
|
// for both classes must be in the include path of your project
|
|
#include "I2Cdev.h"
|
|
#include "AK8975.h"
|
|
|
|
// class default I2C address is 0x0C
|
|
// specific I2C addresses may be passed as a parameter here
|
|
// Addr pins low/low = 0x0C
|
|
// Addr pins low/high = 0x0D
|
|
// Addr pins high/low = 0x0E (default for InvenSense MPU6050 evaluation board)
|
|
// Addr pins high/high = 0x0F
|
|
AK8975 mag;
|
|
|
|
int16_t mx, my, mz;
|
|
|
|
#define LED_PIN 13
|
|
bool blinkState = false;
|
|
|
|
void setup() {
|
|
// join I2C bus (I2Cdev library doesn't do this automatically)
|
|
Wire.begin();
|
|
|
|
// initialize serial communication
|
|
// (38400 chosen because it works as well at 8MHz as it does at 16MHz, but
|
|
// it's really up to you depending on your project)
|
|
Serial.begin(38400);
|
|
|
|
// initialize device
|
|
Serial.println("Initializing I2C devices...");
|
|
mag.initialize();
|
|
|
|
// verify connection
|
|
Serial.println("Testing device connections...");
|
|
Serial.println(mag.testConnection() ? "AK8975 connection successful" : "AK8975 connection failed");
|
|
|
|
// configure Arduino LED for
|
|
pinMode(LED_PIN, OUTPUT);
|
|
}
|
|
|
|
void loop() {
|
|
// read raw heading measurements from device
|
|
mag.getHeading(&mx, &my, &mz);
|
|
|
|
// display tab-separated gyro x/y/z values
|
|
Serial.print("mag:\t");
|
|
Serial.print(mx); Serial.print("\t");
|
|
Serial.print(my); Serial.print("\t");
|
|
Serial.println(mz);
|
|
|
|
// blink LED to indicate activity
|
|
blinkState = !blinkState;
|
|
digitalWrite(LED_PIN, blinkState);
|
|
}
|